Changzhou metal stamping parts manufacturer, stamping production FAQ + 15 years stamping experience team

What are the common problems in stamping processing? Changzhou hardware stamping parts manufacturers have introduced relevant content, Xiaoshuo compiled some relevant information, and I will share with you below: 1. Adhesion, scratches: due to friction between the material and the punch or die, the surface of the workpiece or mold 2. Burr: mainly occurs in the cutting die and blanking die. The gap between the cutting edges may be large or small, which will produce burrs; 3. Line offset: the part that first contacts the mold when the part is formed It is squeezed and formed a line; 4. Concave and concave: foreign matter (iron filings, rubber, dust) mixed in the uncoiling line causes convex and concave; 5. Torturous: due to uneven stress, poor matching of drawing beads or poor control of the press slider Causes tortuosity and strain at the r-corner or embossing part of the workpiece; 6. Wrinkles: due to poor adjustment of the press slider, low press accuracy, improper adjustment of the air cushion pressure, large punch or r part, etc. r wrinkles. Hardware, 15 years of ingenuity focused on metal stamping parts processing, 20000+ sets of stamping die customized production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm ,The raw materials are imported and national standard original factories, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!