Changzhou metal stamping parts processing plant, main features + silk-like stamping accuracy can reach 0.01mm ()

The production staff of the Changzhou metal stamping parts processing plant said that stamping parts are mainly made of metal or non-metallic sheets by means of the pressure of a press machine. The following Xiaoshuo will take everyone to take a look at it. The following features: ⑴ Stamping parts are manufactured by stamping under the premise of low material consumption. The parts are light in weight and rigid, and after the sheet material is plastically deformed, the internal structure of the metal is changed to make the stamping part stronger has seen an increase. ⑵The stamping parts have high dimensional accuracy, the same size as the mold parts, and good interchangeability. No further machining is required to meet general assembly and use requirements. ⑶ Stamping parts in the stamping process, because the surface of the material is not damaged, so it has a good surface quality, smooth and beautiful appearance, which provides convenient conditions for surface painting, electroplating, phosphating and other surface treatments. Hardware, 15 years of ingenuity and focus on metal stamping parts processing, 20,000+ sets of stamping die customized production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!