Chaozhou metal stamping parts processing plant, what are the common problems? +15 years the manufacturer takes you to understand ()

The production staff of Chaozhou metal stamping parts processing plant have mentioned some common problems in stamping processing. What are the specific ones? The following Xiaoshuo sorted out some related materials, and let everyone take a look: 1. Adhesion, scratches: defects that appear on the surface of the part or mold due to the friction between the material and the punch or die; 2. Burr: Mainly Occurs in the cutting die and the blanking die, the gap between the cutting edges may be large or small, which will produce burrs; 3. Line offset: When the part is formed, the part that first contacts the die is squeezed and a line is formed; 4. Convex and concave: foreign matter (iron filings, rubber, dust) mixed in the uncoiling line causes convex and concave; 5. Torturous: due to uneven stress, poor drawbead matching or poor control of the press slider, the corners or pressure of the part are caused. Zigzags and strains occur in the flower parts; 6. Wrinkles: Wrinkles on the edges or r parts are caused by improper adjustment of the press slider, low press accuracy, improper adjustment of the air cushion pressure, large punch or r part. Hardware, 15 years of ingenuity focused on metal stamping parts processing, hundreds of processing and production equipment, 20,000+ sets of customized production experience in stamping dies, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm, The 16 quality inspections are strictly controlled, focusing on quality and meticulous design. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!