Common problems and solutions in the production of metal hardware stamping parts-hardware

Metal and hardware stamping parts will encounter mold wear, mold damage, poor materials, size deviation, excessive burrs and so on. Affected quality issues, efficiency issues, and cost issues. How to reduce this problem to ensure product results? As we know before, metal hardware stamping parts are stamped into the products we need through raw materials, molds, and punching machines. Among the three, the control of raw materials is relatively less complicated, and the normal maintenance of the stamping machine is not difficult. , The most important thing is the design, processing and assembly of molds. Therefore, before designing, it is necessary to make a reasonable design plan carefully according to the product accuracy, the nature of the materials used, the thickness of the material, and the structure of the product. The hardness of the heat treatment during processing, such as turning, milling, grinding, drilling, wire cutting, etc., are strictly required, and all are made in accordance with the requirements of the drawings. During assembly, let the experienced master as much as possible to place the gap data between each part and the mold. Hardware, more than 20 design engineers for metal and metal stamping parts for 15 years, hundreds of precision processing production equipment, 5000 square meters production workshop, the concept of customer demand results as work results, and honesty and trustworthiness as the company culture, is your partner of choice Ideal choice!