Common process treatments in metal stamping processing

Common process processing in metal stamping processing In the stamping parts industry, stamping is sometimes called sheet forming, but there is a slight difference. The so-called sheet forming refers to the forming method of plastic processing using sheet material, thin-walled pipe, thin profile, etc. as raw materials, collectively referred to as sheet forming. At this time, the deformation in the direction of the thick plate is generally not considered.　　 PHP series portable surface Rockwell hardness tester is very suitable for testing the hardness of these stamping parts. Alloy stamping parts are the most commonly used parts in metal processing and mechanical manufacturing. Metal stamping parts processing is a processing method that uses molds to separate or shape metal strips. Its application range is very broad. The hardness test of metal stamping parts adopts Rockwell hardness tester. Small stamping parts with complex shapes can be used to test the plane is very small, can not be tested on the ordinary desktop Rockwell hardness tester. The PHP series portable surface Rockwell hardness tester is very suitable for testing the hardness of these stamping parts. Alloy stamping parts are the most commonly used parts in metal processing and mechanical manufacturing. Stamping processing is a processing method that uses molds to separate or shape metal strips. Its application range is very broad. Previous post: The development direction of plastic-wood stainless steel buckle composite materials