Control points of occupational hazards in the production process of metal stamping factories

Aiming at the key control points of occupational hazards in the current production process of metal stamping factories, it is recommended: 1) Strive for conditional reforms, adopt automated operations and closed production process equipment, and reduce the chance of workers directly contacting occupational hazards. 2) For steel plate shearing, pressing, rolling, polishing (flat polishing, bending polishing, machine edging, hollow shank polishing, edging, hand polishing) and other processing processes, noise and vibration exceeding standards will be added to prevent noise and vibration. Equipment to reduce the continuous noise and vibration time of workers, and properly wear appropriate earplugs, gloves and other personal protective equipment. 3) For the dust generated during polishing (flat polishing, curved polishing, machine edging, hollow handle polishing, edging, hand polishing), local ventilation of the polishing post should be strengthened, and the dust removal equipment and filter system should be cleaned in time on a regular basis. Semi-closed treatment can be carried out according to the actual situation, and dust masks should be worn correctly and replaced regularly. 4) For workers who have been identified as occupational contraindications, they should be transferred as soon as possible to avoid continued exposure to corresponding occupational hazards. Workers who are found to be suspected of occupational diseases should cooperate with the requirements of occupational disease diagnosis agencies, submit occupational disease diagnosis, and carry out corresponding treatment as soon as possible. 5) Improve and implement the occupational hygiene management system of metal stamping factories, establish occupational hygiene management organizations, do a good job of occupational hygiene education, and conduct occupational hygiene knowledge training in a planned and organized manner, such as material toxicity, health hazards, rules and regulations, and personal protection , Accident lesson analysis, etc., to improve workers’ awareness of personal protection and pre-hospital emergency response capabilities. 6) Establish an occupational hazard notification system, which mainly includes a bulletin board notification system, a hazardous post notification system, etc. The rules and regulations, operating procedures, emergency rescue measures for occupational disease hazard accidents and the detection results of occupational disease hazard factors in the workplace shall be truthfully informed to workers. Previous post: Analysis of existing problems in the development of foreign trade in Zhejiang hardware industry