Corrective action (riveting terminal bad phenomenon Below)

1, riveting terminal cavity size and depth to diameter are always high in place to control the riveting, heightening the second step of the height of the lower die or take off the plate parts without shedding 3, rivet, minus the first step riveting height of punch. Step 2: heightening the riveting height lower die parts. 3: replace the smaller rivet rivet head diameter. Step 4, subtract 2 riveting of height of punch, 5, 1: the first step and riveting the height of the punch six, under the condition of the rivet don't fall off, the first step in reduced the height of the riveting punch. Or replace big diameter smaller rivet 7 points, vibration plate of four angles to the stability, can not shake, to aim at two tapping. 8, refueling cavity clean. 9, riveting terminal pressure within the mold as long as in the case of rivet can promote the mould moving, try to open a small point of 10, each class to be with a clean cloth and alcohol cleaning stainless steel part of the vibration plate, use dry cloth to clean up the rest of the parts. Precision stamping factory dare to break through technical difficulties, but production film automatic riveting inside terminal, automatic mould tapping parts, precision mould injection terminals, etc. Precision contact: wish you a prosperous business, everything goes well, if you want to learn more dynamic, can scan the qr code, pay attention to the public. , is committed to precision stamping processing factory of the world's most professional electronic components