Dalian stamping parts processing, precision stamping die processing production gap problem solution

Dalian stamping parts processing, I will share with you that in the processing and production of precision stamping dies, there are often inaccurate mold clearances, which affects quality and productivity. How should it be solved? Xiaoshuo will understand with you: Reasons for the gap size: 1. The pre-folding line is too deep or the position is offset. 2. The angle is too large and deformed after the folding 3. The smooth block is not enough to give way 4. The gap between the smooth block is pushed Too high or too low or the mold is closed and the pressure is too high and not crushed. 5. Pushing the smooth block is not enough to make way. 6. Pushing the gap of the smooth block is too small or too large. 7. The material is too hard. Solution: 1. Modify the pre-folding The height or position of the side pressing line 2. Adjust the folding angle and material deformation 3. Adjust the height or mold height of the upper mold pressing block 4. Increase the clearance of the push smooth block 5. Adjust the gap hardware of the push smooth block, 15 years Ingenuity focuses on the processing of stamping parts in Dalian, with 20,000+ sets of customized mold production experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to ±0.01mm, and 16 quality inspection layers to strictly control the quality. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!