Dalingshan metal stamping parts processing plant, hardness testing + 16 strict quality inspections

Speaking of the hardness testing of metal stamping parts, the technicians of Dalingshan metal stamping parts processing plant have talked about the relevant content. Xiaoshuo compiled some information, and I will share with you below: The hardness testing of metal stamping parts uses Rockwell hardness tester. Small stamping parts with complex shapes can be used to test the plane is very small, can not be tested on the ordinary desktop Rockwell hardness tester. The main purpose of the hardness test of stamping parts is to determine whether the annealing degree of the purchased metal sheets is suitable for the subsequent stamping parts processing. Different types of stamping parts processing techniques require plates of different hardness levels. The aluminum alloy plate used for stamping parts can be tested with a Webster hardness tester. When the thickness of the material is greater than 13mm, it can be changed to a Barcol hardness tester. The pure aluminum plate or low hardness aluminum alloy plate should use the Barcol hardness tester. Dongguan Hardware Co., Ltd., 15 years of experience in stamping parts production, more than 20 mold Ru0026D and design engineers, 5000 square meters workshop, hundreds of precision machining production equipment, 3 million punching next-day production capacity, 20000+ sets of stamping die customized production experience, 16 Strict quality inspection, the precision of stamping parts can reach 0.01mm. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!