Debugging of stamping parts and the purpose of debugging

After the stamping part die is assembled, the quality of the stamping part and the performance of the die must be comprehensively inspected and inspected. The problems that occur during the trial punching stage must be comprehensively analyzed to find out the cause of the problem, and the stamping part die should be properly performed The adjustment and correction of the stamping parts will finally achieve the quality of the stamping products; the purpose of the stamping part die test and adjustment 1. To identify the quality of the stamping parts and the mold 2. To determine the forming conditions of the stamping parts 3. To determine the blank shape of the formed parts, Size and material standards; in the production of stamping molds, it is difficult to accurately calculate the blank before deformation in the design of some stamping parts with complex shapes or high precision requirements such as bending, deep drawing, forming, and cold extrusion. Size and shape. In order to obtain more accurate blank shape, size and material standards, it can only be determined after repeated debugging of the mold to make qualified parts; 4. For some processes that are difficult to be determined by calculation methods in mold design and process design Dimensions, such as the complex convex and concave corners of the drawing die, or the geometric shape and size of certain parts of the die, must be tested and adjusted at the same time, until the qualified parts are punched out, the shape and size of these parts can be finally determined ; How to install the stamping die on a single-action press; article recommendation: How to maintain the stripper plate in the metal stamping die? Previous post: How to maintain the stripper plate in the metal stamping mold?