Deep drawing stamping process of stamping parts

Deep drawing stamping parts are widely used. There are deep drawing stamping parts in our lives and industrial production, such as household electronic equipment, automobile manufacturing, electronic and electrical equipment, etc., there will be deep drawing stamping parts; stamping parts The deep drawing stamping process is a special stamping method, the principle is to rely on the press and die to apply external force to the plate, strip, pipe and profile, etc., to produce plastic deformation and separation, so as to obtain the required shape and size of the stamping Products; deep drawing stamping uses a die, which is composed of a punch and a die. One die for one station, usually up to 18 stations, and when designing a die for stamping parts, it is usually considered to use all the stations. , The stamping parts generated in this way are more stable in each step, and the quality of stamping parts is good. The deep drawing process of stamping parts is conveyed without belts. The products are separately transferred in the mold and conveyed between the stations by the built-in mechanical arm, which can be reversed arbitrarily, so that stamping products with more complicated shapes can be formed; Like: thread, side hole, side groove, cross-section reverse drawing, etc.; deep drawing stamping parts also have the advantages of energy saving and environmental protection, because of its special manufacturing process, many materials are reasonable in the process of processing It is used and does not require much consumption, so it not only saves energy but also saves production costs. Therefore, the deep drawing stamping process has a great effect on the efficiency of industrial production and the energy saving and environmental protection of modern society; the article recommends: Stamping process of automobile stamping parts Previous: Cutting method of metal stamping parts