Design requirements for precision stamping molds

Everyone should know that the mold has an important influence on the processing effect of precision stamping parts, but the safety of the mold during operation is easily overlooked by us. In fact, the standard of mold operation safety is also an important issue that we should consider when designing stamping molds. So, when designing a mold, what aspects do we need to consider? In response to this issue, the author made a special summary, and now share the specific content with you, hoping to help us better understand the safety of the design of stamping die operation. First of all, when designing, we must try our best to ensure that when using this type of mold, it should meet the requirements of convenience in use and operation. For example, it should be easy to carry out work such as feeding, ordering and cleaning up waste. If it is necessary to process large precision stamping parts, the safety protection measures of the operator should be considered, and the scope of the operator's hand into the mold should be avoided as much as possible. Secondly, it must be noted that when the operator is in use, he will not be hurt. If you are processing some small precision stamping parts, you should prohibit the operator's fingers, wrists and other body parts from reaching into the mold area. In addition, it should also avoid the phenomenon of waste or workpiece missiles during the processing, which affects the operator's Attention, and even hurt the operator. Then, we must ensure the stability and reliability of the equipment, which is also a requirement for its performance. Under normal circumstances, handling, operation and installation work should be considered for the mold design. The assembly and disassembly of mold parts should be convenient and safe to prevent problems such as pinching and cutting hands; precision stamping molds should also be convenient for storage. Finally, there are still a lot of content about its safety considerations, so no matter in the actual design, the requirements of the production link should be fully considered, and it is best to avoid excessive and difficult actions during the operation. As much as possible to ensure that the precision stamping die meets the requirements of use. Related news: The characteristics of the main materials of stamping parts, the treatment of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections