Detailed analysis of several problems frequently encountered by customers in the processing of stamping hardware [hardware]

Stamping hardware processing is mostly stamping parts customized according to different customer products, different materials, different sizes and structures. In general, this kind of customized stamping parts will have a serious impact on time and quality as soon as there are matching and quality problems. Xiaoshuo will work with you today to understand what are the common problems: 1. The evaluation of the drawings is not accurate. For various reasons, some stamping plants did not make a detailed analysis of the customer's product drawings. Leading to a variety of unexpected results in the later production. 2. The cycle and quality of sample analysis are not up to standard. For most customers, for stamping hardware processing, there will be a stage of assembling samples in the early stage. If the stamping plant fails to cooperate in time and quality, it will also cause time delays and poor assembly problems. 3. The cycle of the mold is slow and the accuracy is not up to standard. Stamping dies will be produced at different times depending on the structure of the stamping parts. This point needs to be solved by the customer and the stamping factory. For some products with complex structures, sufficient molding time is required. The accuracy of the mold is directly related to time, design, processing, assembly, punching, and personnel. 4. Product quality control. With the progress of industry, workshop-style processing plants have been gradually replaced. Customers continue to demand the precision of stamping parts and the rising cost of stamping, which can no longer tolerate the excessive loss of stamping factories and the result of bad judgment. 5. Quality control of external processing. For example, for some processes that require external surface treatment such as electroplating and oxidation, most stamping plants need to be processed outside. If there is no effective quality control ability, it is easy to have quality problems in these links. Affected time, cost, and customer shipments. 6. Problems arising from packaging. There are also many types of packaging methods for stamping parts, such as simple PE bag packaging, pallet packaging, and carrier tape packaging. Either way, the stamping plant needs to take into account collisions, extrusions, transportation bumps and other factors, and avoid them in advance. Hardware, 15 years of focus on stamping hardware processing, 5,000 square meters production workshop, hundreds of precision processing and production equipment, more than 20 Ru0026D and design engineers, and 20,000+ sets of stamping mold production experience. The monthly processing capacity of 100+ sets of molds, the daily production capacity of 3 million punching times, the stamping accuracy can reach 0.01mm, and the 16 quality inspections are strictly controlled. It can quickly solve the time-critical problem of stamping hardware processing, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, let you choose peace of mind, peace of mind, rest assured!