One Stop Solution Manufacturer for all kind of Stamping Products and CNC lathed products.
Modern urban life is busy and tense, and a warm home can bring everyone the most relaxing leisure time. But how can you make your home warm and comfortable? As long as you master some small skills, you can easily create a pleasant home. We have prepared a series of fashion information from house decoration to home furnishing to help you have a relaxed and comfortable life.
The damage to the hardware fittings of plastic steel doors and windows is generally manifested as: the hardware fittings are not fixed firmly, loose and fall off, the pulleys, sliding hinges, etc. are damaged, and the opening and closing is not flexible.
Causes of hardware damage:
Improper selection of hardware accessories, low quality; no metal liner is installed when tightening, and there is insufficient installation strength.
Measures to prevent hardware damage:
1. The model, specification and performance of the hardware fittings selected should conform to the current national standards and relevant regulations, and match the selected plastic doors and windows.
2. For sliding windows with a width of more than 1m, or double-glazed doors and windows, double pulleys should be installed, or rolling pulleys should be used.
3. The sliding hinge shall not be made of aluminum alloy, but shall be made of stainless steel.
4. When installing hardware with fastening screws, a metal lining plate must be installed inside, and the thickness of the lining plate should be at least twice the pitch of the fasteners. It must not be fastened to plastic profiles, and non-metallic linings must not be used.
5. Hardware accessories should be installed last, door and window locks, handles, etc. should be assembled after the window and door leaves are in the frame to ensure the correct position and flexible switching.
6. Pay attention to maintenance after hardware installation to prevent rust and corrosion. In daily use, open and close lightly to prevent hard opening and hard closing, which may cause damage.
Contact Person: Steven Yan
Whatsapp: +86 15916928704
Wechat: CITY-STOP
Phone: +0086 159 1692 8704
E-MAIL: ym@syjwj.com.cn
One-stop manufacturer for all kind of stamping products and CNC lathed products.