Do you know the reasons for poor machining of precision stamping parts? 'Hardware'

When you are processing its precision stamping parts, the phenomenon of material turning and distortion may occur. There are many reasons for this phenomenon. Let us introduce you in detail! If the precision stamping parts are processed by the instructor during the blanking, the material is turned and twisted. Then you need to study the cutting edge, and also need to pay attention to check whether the blanking gap is reasonable. If it is caused by the instability of the stamping part when it is bent, then you need to deal with its U-shaped V-shaped bending. To deal with the problem, the guide position of the precision stamping part before bending is caused by the slippage of the guide position during the bending process. If your precision stamping parts are turned over, twisted and deformed, resulting in poor forming, then you need to solve the problem by punching and unloading. According to a study, among steel, 60% to 70% are plates, and most of them are stamped into finished products. Therefore, you can fully imagine how extensive the application of precision stamping parts processing is, so how to prevent the occurrence of defects in precision stamping parts is particularly important.