Does the choice of metal raw materials affect the processing technology of stamping parts?

The selection of stamping metal raw materials has a direct impact on the design of stamping processing technology; to a certain extent, the processing design of stamping parts cannot be free from the constraints of the materials used for stamping, such as sheet material, strip material, coil material, or Waste material utilization, etc., the process plan formulated is also different; when using leftover materials or structural waste as raw materials for stamping parts, only single-process die or composite die stamping production can be considered, and progressive die cannot be used. The mechanical properties and process properties of the raw materials used in the processing of stamping parts are closely related to the quality of the stamping parts, which will directly affect the formulation of the stamping parts processing plan; another example is the deep drawing of a stamping part. With a smaller yield ratio and a larger plate thickness anisotropy coefficient, the drawing process is quite easy. It is possible to draw successfully with less drawing times or even one time. On the contrary, if the hardness is high, the yield ratio is Large and small plate thickness anisotropy coefficients are difficult to deepen processing; in this case, in order to ensure the quality of the deep-drawn stamping parts, it is necessary to consider increasing the number of drawing times or other auxiliary processes in the process design of the stamping parts It can be seen that a full understanding of the details of the stamping raw materials will help the subsequent process design work; recommended article: What is the basic content of the stamping design for stamping parts processing plants? Previous post: Technical requirements and indicators of metal stamping parts