Dongguan Dongguan Hardware Stamping Die Manufacturing Factory, how to save materials better when using plates

According to the needs of customers, Dongguan Hardware Stamping Die Manufacturing Factory has some materials that need to use plates. When cutting the plates, pay attention to the following details. You can optimize costs and reduce costs for customers. Xiaoshuo, share with you: 1. The cutting machine is used to cut out the length and width of the unfolded drawing. If there are punching and corner cutting, then turn the punch to combine die punching and corner cutting to form. 2. Punch blanking is to use a punch to punch the flat part structure after unfolding the part on the plate in one or more steps. Its advantage is that it is time-consuming, short and efficient, and is often used in mass manufacturing. 3. When CNC blanking, you must first CNC programming, compile the drawn unfolded drawing into the content that can be recognized by the CNC machine tool, and let it follow these content step by step The structure and shape of its flat parts are punched out. 4. Laser blanking is the use of laser cutting to cut out the structure and shape of the flat parts on a piece of plate. 15 years of ingenuity focused on the production and production of stamping and stamping parts. The hardware of Dongguan Dongguan Hardware Stamping Mold Manufacturing Factory has 20,000+ sets of customized mold production experience, a daily production capacity of 3 million punches, and 16 quality inspections. It can quickly solve the time-critical problems for you, quickly solve the problems of the accuracy of stamping parts, and quickly solve the quality problems of mass production for you.