Dongguan Hardware Stamping Factory, are you aware of these attention issues in the punching process?

In Dongguan Hardware Stamping Factory, punching is a relatively common processing technology. In punching, are you aware of these common problems? Xiaoshuo will work with you to understand: 1. For punching with smaller apertures from φ0.8 to φ1.6, please use customized punches. 2. When punching a thick plate, please use a mold that is one size larger than the processing hole diameter. Note: At this time, if the usual size mold is used, it will cause damage to the punch thread. 3. The ratio of the smaller width to the length of the punch cutting edge part should generally not be less than 1:10. 4. The relationship between the smaller size of the punch cutting edge and the plate thickness. It is recommended that the smaller size of the cutting edge of the punch is twice the thickness of the plate. Hardware, 15 years of ingenuity and focus on Dongguan Hardware Stamping Factory, 20,000+ sets of customized mold experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!