Dongguan hardware stamping parts factory, pay attention to these points, the quality is more qualified-Hardware

In the production of stamping parts, the phrase “chicken soup” is fulfilled. The problem is inevitable, and the smoothness is accidental. Find the Dongguan hardware stamping parts factory to understand these conditions, and the quality will be more qualified: 1. Choose stamping materials with large elastic modulus and small yield point and more stable mechanical properties; 2. Increase the correction process, and use correction bending instead of free bending; 3. Bending The front material should be annealed to make the cold work hardened material soften in advance and then bend into shape; 4. If the shape deformation occurs during the stamping process and it is difficult to eliminate; the slope of the punch and the concave mold should be replaced or trimmed, and the convex and concave molds should be replaced or trimmed. The gap is equal to or less than the material thickness; 5. Increase the contact area between the die and the workpiece, and reduce the contact area between the punch and the workpiece; Hardware, 15 years of experience in the stamping industry, custom processing and production of 20,000+ sets of molds, 3 million punching times per day Daily production capacity, 16 quality inspections are strictly for quality control. Is your reliable choice for choosing Dongguan hardware stamping parts factory!