Dongguan hardware stamping parts manufacturer, die structure + more than 20 mold R u0026 D design engineers

Regarding the die structure of metal stamping, the manufacturer of metal stamping parts in Dongguan has introduced it. What are the specific contents? The following Xiaoshuo sorted out some information, let you know: Die structure: Die is a tool to separate or deform the sheet. A typical die structure consists of two parts: an upper die and a lower die. The die handle of the upper die is fixed on the slider of the punch and moves up and down with the slider, while the lower die is fixed on the worktable of the punch. The punch and the die are the working parts of the die that deform or separate the blank, and are fixed on the upper and lower templates with a pressure plate. The upper and lower templates are respectively equipped with guide sleeves and guide posts to guide the alignment of the punch and the die. The guide plate and the positioning pin are respectively used to control the feeding direction and length of the blank. The function of the discharge plate is to release the workpiece or blank from the punch after punching. Hardware, 15 years of ingenuity focused on metal stamping parts processing, 20000+ sets of stamping die custom production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm ,The raw materials are imported and national standard original factories, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!