Dongguan hardware stamping products factory, 15 years of factory stamping and processing bending parts three major attention

Dongguan hardware stamping products factory, in the usual stamping processing, has many stamping parts, which require bending processing technology, that is, through the stamping die, the metal material is bent into the required shape. What should I pay attention to? Xiaoshuo understands with you: 1. The shape of the bending part should be as symmetric as possible, and the bending radius should not be less than the smaller bending radius allowed by the material. 2. The curved side is too short to be easily formed, so the straight part of the curved side should be made H>2δ. If H is required to be very short, you need to leave a proper margin to increase H, and then cut off the added metal after bending. 3. When bending parts with holes, in order to avoid the deformation of the holes. Hardware, 15 years of ingenuity and focus on Dongguan Hardware Stamping Products Factory, 20000+ sets of mold customization production experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punches, stamping The accuracy can reach 0.01mm, and 16 quality inspections are strictly controlled. You can quickly solve the time-critical problem of precision stamping parts, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose to rest assured!