Dongguan Hardware tells you to pay attention to these qualification rates in the production process of hardware precision stamping parts to increase 80%

Dongguan Hardware tells you that in the process of making hardware precision stamping parts, pay attention to the increase of the qualification rate of these precision stamping parts by 80%. 1. Poor mold design or processing and assembly lead to poor dimensions. This situation generally occurs at the beginning of production. 2. The height adjustment position of the mold does not match when the mold is set, and the mold cannot be in place when the metal is stamped, causing the size to be inconsistent, or the die head is not locked after the adjuster mold, and the mold height runs off during the metal stamping. 3. When positioning, it is not placed in an accurate position, and the die gap will increase due to the heavy chip, which will also lead to poor size. 4. The positioning of the mold is loose, and the hardware precision stamping parts are offset when positioning, and the size of the hardware is not good until the hardware is stamped.