Dongguan metal stamping factory, the design standard specification result is more qualified

In Dongguan Hardware Stamping Factory, the prerequisite for the customization of stamping parts is custom molds, and the prerequisite for custom molds is often the designer's design of mold drawings. The formation of standard specifications is more helpful to the qualification of the results. 1. When designing metal stamping parts, it should be ensured that under normal use, the dimensional accuracy and surface roughness requirements should be as low as possible, and it should be beneficial to the exchange between metal stamping parts, reducing waste, and ensuring Stable quality of metal stamping parts. 2. When designing metal stamping parts, the existing equipment, process equipment and procedures should be used as much as possible to process the metal stamping parts, and at the same time, it should be beneficial to prolong the service life of the stamping die. 3. The designed stamping parts must be conducive to improving the utilization rate of metal materials, reducing the types and specifications of materials, and reducing the consumption of materials as much as possible; using low-cost materials where permitted, and making parts as waste-free Less waste arbitration. Hardware, 15 years of ingenuity focused on Dongguan Hardware Stamping Factory, 20000+ sets of mold custom processing and production experience, monthly 100+ sets of mold processing capacity, 3 million punching production capacity per day, stamping accuracy up to 0.01mm, and 16 quality inspections strictly. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve mass production quality problems. Choose, choose to rest assured!