Dongguan metal stamping parts company, finishing of stamping molds + more than 20 mold R u0026 D engineers

Dongguan hardware stamping parts company, the so-called precision machining of mechanical parts, is to ensure the highest accuracy of mechanical parts, and also puts forward higher requirements for enterprises. The completion of mechanical parts finishing is equivalent to improving the accuracy of mechanical parts and improving from the side. For production quality and economic benefits, the finishing using stamping dies must be carried out in strict accordance with the corresponding processing procedures, and attention must be paid to processing safety. The finishing of stamping dies includes four processing procedures. The following Xiaoshuo will take a look at the specific content: 1) Production: The main platform of stamping processing is the workbench, where the concave and convex molds are controlled to determine the stamping that the mechanical parts can withstand. In this way, it can prevent the stamping from being too large or too small, resulting in lower machining accuracy of the parts, losing the meaning of processing, and finally avoiding the parts from punching out of the worktable during the stamping process. 2) Positioning: Positioning is the key to controlling the progress of the parts. If there is a deviation, not only the processing accuracy will be reduced, but the operational safety cannot be guaranteed. Therefore, when stamping is performed, precise positioning must be carried out, considering the structure of the stamping die, the safety of stamping, operation control and other aspects, and the positioning of the finished parts is reasonable. 3) Guidance: The guiding structure link is mainly to plan the upper and lower stamping routes to ensure that the concave and convex molds meet the standard requirements during the processing of the stamping die. The guide post is the most commonly used guide device in stamping die processing, which not only plays a fixed role, but also ensures that the guide post will not be damaged during finishing. 4) Fixation: For stamping die processing, there are many parts that need to be fixed, including screws, nuts, and springs. Each part must be well fixed. Before stamping the die, the integrity and safety of the parts must be checked. Sex is checked. This is because the stamping of the stamping die processing itself is very large. Once the workpiece is not fixed well, it will lead to the development of offset, which will have a very serious impact on the processing accuracy. Therefore, the fixation is the most important link. Hardware, 15 years of focus on Dongguan hardware stamping parts company, 20,000+ sets of customized stamping die production experience, monthly processing capacity of 100+ sets of molds, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and silk-like stamping accuracy 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!