Dongguan precision stamping, what you expect is what you have been doing

Dongguan precision stamping takes the result of your needs as the result of work, and people have been working hard to achieve it for 15 years. There are many difficulties, but this is not the reason, the result is the result. Just like the bending problems encountered in stamping: 1) When the stamping part is bent, most of the strain of the material layer enters the plastic deformation zone, and these material layers will not spring back. 2) The strain of the material layer closer to the neutral layer is still in the elastic deformation zone. After the external force disappears (the bending punch leaves the workpiece), the material layer will rebound. The factors that affect the rebound: (1) Material The higher the elastic limit, the greater the required deformation stress and the greater the springback. (2) The smaller the relative bending radius R/T of the material, the more concentrated the stress. The smaller the proportion of elastic deformation, the greater the springback. Yuexiao Hardware, 15 years of ingenuity focusing on precision stamping in Dongguan, 20,000+ sets of customized mold processing and production experience, monthly processing capacity of 100+ sets of stamping dies, daily production capacity of 3 million punches, stamping accuracy up to ±0.01mm, 16 passes The quality inspection process is strictly for quality control. It can quickly solve the time-critical problem for you, solve the precision problem of choosing Dongguan precision stamping for you, and solve the quality problem of mass production for you.