Dongguan shielding cover manufacturers do this well before they are qualified

Assembly is the last few steps of the production and shipment of shielding cover manufacturers in Dongguan. It may seem irrelevant, but in fact it is the top priority. If the assembly is not done well, it is very easy to cause product defects. During the product assembly process, it should be noted that there is a gap of 0.03-0.05mm between the shielding frame and the shielding cover on one side. If the frame dimensions go to the upper limit, the lid dimensions go to the lower limit and the assembly is tight; If the cover is outside the frame, the inner buckle assembly will also be loose; if the clearance is reasonable, the diameter and height of the convex hull will also affect the tightness of the assembly. When the shielding cover needs to be installed for shipment, sometimes in order to assemble a little tighter, the angle of the shelf is required to be extended. In this case, the actual matching effect shall prevail. If the shelf is arched, the assembly height will be high. If you want to know more about consultation, please add WeChat: free consultation