Dongguan shielding cover manufacturers tell you how to solve the difficult direction of module shielding-hardware

Ms. Fang, a customer from Shanghai, reported that the shielding cover of the 3G module used by her home always had problems in the opposite direction on the production line. I have found many Dongguan shielding cover manufacturers, but they have not been able to solve this problem. As a boxy shield, the left, right, up, down, and visual observations are very similar to the shield, and it is inevitable that the direction will be reversed when packaging. And this kind of reversal, when the customer is patching, it cannot match the PCB board, which will cause the motherboard to short-circuit. After seeing the customer’s drawings, Mr. Liang of the Engineering Department immediately communicated with the customer whether it is possible to punch an extra hole in a corner of the shielding cover to determine the direction, but the customer did not accept it. Finally, communication can only be stamped with a small positioning stamp in one corner. And this kind of positioning mark, because it is too small and not clear, will still cause the hidden danger of product reverse during packaging. Qunge, as a Dongguan shield manufacturer trusted by so many customers, must not smash the signs by himself, so he immediately contacted the automation company Mr. Zheng. An infrared vision automatic inspection packaging machine was made urgently. When each packaged shielding cover goes to the position of the infrared probe, it will automatically detect the positioning mark at the corner of the shielding cover by infrared. If it is detected, it will move forward automatically. The accuracy rate was 100%, and the problem of Miss Fang’s family was immediately resolved. For more industry issues of Dongguan shield manufacturers, please call Qunge: