Dongguan stamping parts, a manufacturer with 15 years of experience and rich technology

Dongguan stamping parts, stamping factory in the design from the source and the material control from the source, take the result of customer demand as the result of work, improve quality, increase production capacity, reduce price and cost, and give customers a favorable space. Several problems in the manufacturing process, Xiaoshuo will share with you: 1. When trying out the mold, to test the stretching effect, you can put sandpaper on different positions on the material to test the effect. After confirming the effect, move the drawbead at the corresponding position. Or the active pit matrix (that is, a piece of plated part is ground into pits), which is used to friction and hinder material removal. 2. When you try the mold for the first time, you must slowly close the upper mold. When there is a stretching process, you must use the fuse to test the thickness of the material level. After the material level gap reaches the material thickness, try the mold again. The knife edge must be first That's right. Please use movable inserts to adjust the height of the drawbead. 3. When adjusting the forming angle, you can reduce the R angle during bending or move the folding line datum to achieve the purpose of forming angle. Hardware, 15 years of ingenuity and focus on Hebei stamping parts, 20000+ sets of mold customization processing and production experience, monthly 100+ sets of mold processing capacity, 3 million punching production capacity per day, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!