Dongguan stamping parts, a strong manufacturer in the production process to improve quality and efficiency

Dongguan stamping parts, the same experience of Dongguan culture, has Dongguan efficiency. In the production and manufacturing process, stamping plants can continuously improve their skills to improve efficiency and quality for customers. Some industry knowledge, Xiaoshuo will share with you: 1. When designing the strip, CAE analysis should be carried out at the same time, mainly considering the thinning rate of the material, generally below 25%. 2. Special deep-drawn stainless steel materials can be annealed after pre-stretching. With a high-frequency annealing machine, the thinning rate can be accepted to 40%. When designing the strip, the empty step is also very important. The mold length allows In the case of the circumstance, leaving an empty step appropriately will be of great help to the modification after the test. 3. In the mold design, for the surface with small hole position or tolerance requirements, make adjustable inserts as much as possible, which is convenient for adjustment during mold trial and production, so that it can be easily achieved. The size requirements of the parts must be made at the same time Adjustable inserts. Hardware, 15 years of craftsmanship focusing on Dongguan stamping parts, 20000+ sets of mold customization processing and production experience, monthly 100+ sets of mold processing, 3 million punching production capacity per day, stamping accuracy up to 0.01mm, 16 quality inspection layers are strict check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!