Dongguan stamping processing plant, analysis of general bad reasons for stamping processing [hardware]

Dongguan stamping processing plant, for stamping parts in the production process, what quality problems often occur? Xiaoshuo sorted out a few points and understood with you: 1. The quality of raw materials is poor (material composition, mechanical properties, geometric dimensions, surface quality of the incoming materials); 2. Improper installation and adjustment of the die; 3. The operator did not The strip is correctly fed along the positioning or there is no guarantee that the strip is fed according to a certain gap; 4. Due to long-term use, the gap has changed or its working parts and guide parts are worn; 5. The punch is fastened due to shock and vibration for too long The loose parts cause relative changes in the installation positions of the die; 6. The operator's negligence and failure to operate according to the operating procedures. Hardware, 15 years of craftsmanship focused on Dongguan stamping processing plant. 20000+ sets of stamping die custom processing and production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!