Dongkeng metal stamping parts processing, how to maintain stamping dies + 20 mold Ru0026D and design engineers

The technician in charge of the hardware processing of Dongkeng hardware stamping parts said that regarding the maintenance of the stamping bracket mold in the hardware stamping factory, Xiaoshuo has collected some relevant information for everyone, and let’s share with you below: 1. During the mold use process Punches are prone to breakage, bend and gnaw, and punch sleeves are generally gnawed. The damage of the punch and sleeve are generally replaced with parts of the same specification. The parameters of the punch mainly include the size of the working part, the size of the installation part, and the length dimension. 2. Springs and other elastic parts are easy to be damaged during use, and usually break and deform. The method adopted is to change. During the change, you must pay attention to the specification and model of the spring. The specification and model of the spring are confirmed by the color, outer diameter and length of the three items. Only when the three items are the same can be changed. 3. The cutting edge needs to be sharpened after long-term use, and the cutting edge surface must be demagnetized after grinding, and it cannot be magnetized, otherwise it is easy to cause blockage. 4. Pressing parts such as press plates, Uniglue, etc., unloading parts such as stripping plates, pneumatic ejectors, etc. During maintenance, check the relationship between parts of each part and whether there is damage, repair the damaged part, check whether there is air leakage by pneumatic jacking, and take measures for specific conditions. If the trachea is damaged, replace it. 5. Fastening parts, check whether the fastening parts are loose or damaged. The method adopted is to find the parts of the same specification for replacement. Hardware, 15 years of focusing on the processing of Dongkeng metal stamping parts, hundreds of processing and production equipment, 20,000+ sets of customized stamping die production experience, monthly processing of 100+ sets of molds, daily production capacity of 3 million punching times, and stamping accuracy up to 0.01mm , 16 quality inspection layers are strictly checked, focusing on quality and meticulous design. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!