Electronic hardware stamping parts manufacturer, stamping forming process + brand manufacturers give you the answer

Electronic hardware stamping parts manufacturers have said that the forming process refers to the plastic deformation of the blank under the condition of not being destroyed to form parts with the required shape and dimensional accuracy. So what are the main processes in the forming process? The following Xiaoshuo collected some relevant information, and take everyone to understand: Bending: Use a mold to bend the sheet into a certain angle part, or to bend the bent part again. Deep drawing: Use a mold to press the sheet into a hollow piece of any shape, or further deform the hollow piece. Flanging: Use a mold to turn the hole or the outer edge of the sheet into a straight wall. Bulging: A mold is used to apply an outward radial force to the hollow part to expand the local diameter. Neck: Use a mold to apply radial pressure from the outside to the mouth of the hollow part to reduce the local diameter. Extrusion: Put the blank in the mold cavity and press to extrude it from the gap of the mold to form hollow or solid parts. Hardware, 15 years of ingenuity focused on metal stamping parts processing, one-to-one customized parts tracking service, 20,000+ sets of stamping die customization production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production of 3 million punches Production capacity, the stamping accuracy can reach 0.01mm, the raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!