Electronic hardware stamping parts manufacturer, stamping separation process + strength manufacturers teach you

Electronic hardware stamping parts manufacturers have said that the separation process refers to the process of separating the stamping parts and the sheet material along a certain contour line during the stamping process. It includes several main processes. Xiaoshuo has collected some information, and let's take a look at it. Blanking: Use a die to punch the sheet along the closed line, and the part that is punched is the workpiece. Used to manufacture flat parts of various shapes. Punching: Use a die to punch the sheet along the closed line, and the punched part is waste. Used for punching holes in flat or formed parts. Cutting: Use scissors or a mold to cut the sheet, the cutting line is not closed. It is mostly used to process flat parts with simple shapes. Trimming: Use a die to punch out the excess material at the edge of the workpiece. Mainly used for three-dimensional forming parts. Punching: punching out narrow and long grooves on a sheet or formed part. Cutting: Cut the semi-finished product processed by stamping into two or several parts. It is mostly used after asymmetric double or group punching. Hardware, 15 years of ingenuity focused on metal stamping parts processing, hundreds of processing and production equipment, 20,000+ sets of customized stamping die production experience, monthly processing of 100+ sets of molds, daily production capacity of 3 million punching times, and stamping accuracy up to 0.01mm, 16 quality inspections are strictly controlled at every level. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!