Factors that cause deviations in sawing accuracy of sawing machines

1. The saw blade clamped by the guide angle of the guide arm of the sawing machine is not perpendicular to the table of the sawing machine:

Solution: Install the saw blade and adjust the bolts of the saw guide angle so that the saw blade is perpendicular to the work surface.

Second, the band saw blade may be loose, tighten the saw blade.

3. Band saw blades may be worn: (Guide: Introduction to the main types of machining tools)

Solution: If the saw blade has repair value, it can be repaired. If not, replace the saw blade.

4. The cutting speed of the band sawing machine is too fast. Adjust the speed control valve to make the feed speed slower.

5. The distance between the two guide arms of the sawing machine is too large, adjust the distance of the guide arms, generally 6-10 cm larger than the material

6. The small bearing of the sawing machine in the guide angle of the sawing machine may be damaged, just replace the small bearing!

More related stamping hardware industry news: