Few people know how to increase the life of precision stamping die, hardware tells you

The mold is the necessary process equipment in the production process of precision stamping parts, which determines the quality, life and production capacity of the product, so how to extend the life of the mold? , To avoid losing the working size due to frequent wear in the mold production process, the significance of improving the wear resistance not only increases the service life of the stamping mold, but also ensures the quality of the products produced and improves production efficiency. Specifically, there are the following 1. Reasonable forging and heat treatment of precision stamping die parts. While selecting good stamping die materials, reasonable heat treatment is required for materials of the same material and different properties. Therefore, when manufacturing stamping dies, The heat treatment process must be reasonably mastered. 2. Correctly choose the mold material for precision stamping parts. Different materials have different strength and toughness. Under certain conditions, the use of good materials can increase the durability several times. Therefore, in order to improve the durability of the stamping die, it is necessary to select good materials. 3. The design of precision stamping molds and whether the design is reasonable is the basis for improving the durability of the molds. Therefore, when designing the stamping die, effective measures should be taken to improve the durability of the stamping die, such as the life of the small hole punching die, which is often reflected in the punching die for punching small holes. In the design, the length of the small punch should be shortened as much as possible to increase the strength. At the same time, the method of guide sleeve should be used to strengthen the small punch for protection. The above is a brief introduction to Dongguan hardware, if you need to know more, welcome to consult: