Flat washer manufacturer, can you use carbon steel flat washers for stainless steel bolts?

A flat washer manufacturer, Xiaoshuo once was asked by Mr. Li during a chat with a friend that his house uses stainless steel bolts. Can flat washers use carbon steel? Simply sort out a few points and share with you: Generally, stainless steel bolts are used to prevent rust. Therefore, carbon steel flat washers cannot be used, but on the contrary, carbon steel bolts should be stainless steel washers. For flat washers, stainless steel bolts generally use stainless steel flat washers, but this is not necessarily the case, as long as the performance requirements can be met. For spring pads, stainless steel spring pads are not effective, spring steel should be used as much as possible.　　Ping pad function: 　　1. Enlarge the contact area between the screw and the machine.　　2. Eliminate the damage to the surface of the machine when the spring pad is unloading the screw. When used, it must be a spring pad and a flat pad. The flat pad is next to the surface of the machine, and the spring pad is between the flat pad and the nut. Hardware, 15 years of ingenuity and focus on flat washer manufacturers, 20,000+ sets of mold customization production experience, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose, rest assured!