Flat washer manufacturers, five precautions in the stamping process + 3 million punching next day production capacity

Flat washer manufacturers have a lot of precautions in the production of stamping processing. It is necessary to ensure the qualification of raw materials, confirm the qualification and accuracy of the mold, and ensure the qualification of the first part, as well as the smooth and qualified production. Xiaoshuo will work with you to understand: 1. Regularly check the die mounting base of the punch turntable and stamping parts to ensure the coaxial accuracy of the upper and lower turntables. 2. The metal stamping parts should be strictly inspected before installation and use, the dirt should be cleaned, and the guide sleeve and die of the drawing stamping parts should be carefully checked for good lubrication. 3. In order to ensure the service life of the tension and compression parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the tension stamping parts. 4. When installing the mold, the stamping personnel should use soft metal manufacturing operation tools to prevent damage to the stamping parts when knocking and crushing during the installation process. 5. When the punch and die edges of the stamping parts are worn, they should be stopped in time and sharpened in time, otherwise it will rapidly expand the wear of the die edge, accelerate the wear of the die, and reduce the quality and life of the die. Hardware, 15 years of ingenuity and focus on flat washer manufacturers, 20,000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, stamping accuracy up to 0.01mm, and 16 quality inspections strictly. You can quickly solve the time-critical problem of precision stamping parts, solve the problem of stamping accuracy, and solve the problem of production quality. Choose, choose rest assured!