Flat washer material, with 16 quality inspections to control the results of the manufacturer [hardware]

The material of the flat washer will vary according to different specifications, and the choice of material will also be different. While the flat washer is in use, Xiaoshuo will share with you about the material and use matters: Flat washer: used to overcome the unevenness of the supporting surface of the workpiece and increase the stress area of u200bu200bthe supporting surface, see GB848, GB95～97 and GB5287; spring (elastic ) Washers: Spring washers rely on elasticity and oblique friction to prevent loosening of fasteners. They are widely used in joints that are often disassembled. Large washers have the same purpose as flat washers and are included in flat washers. The washer is stamped out of a thin iron plate, and that kind of iron plate has a reverse face for aesthetics. Therefore, it is only an aesthetic problem to be reflected in the gasket. The friction on the side that is not bright will be larger. When the screw is rotated to the bottom, the washer will not rotate with it, and the contact surface under the washer will not be scratched. Hardware, 15 years of earnest every flat washer material, 16 quality inspection layers to check customer results. 5000 square meters workshop, monthly processing capacity of 100+ sets of molds, flat washer stamping accuracy of 0.01mm, daily production capacity of 3 million strokes. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, you choose worry-free choice, rest assured!