Flat washer mold manufacturer, do you know the knowledge standard of flat washer and stop washer

Flat washer mold manufacturers, in the production of flat washers, are divided into flat washers and stop washers. Xiaoshuo sorted out a few points, and shared some knowledge about flat washers and stop washers with you. I hope it will be helpful to you: Flat washers are mainly stamped out of iron plate, and the shape is generally a flat washer with a flat washer in the middle. A hole. The function of the flat pad: (1) Enlarge the contact area between the screw and the machine. (2) In addition to the damage to the surface of the machine when the spring pad is unloading the screw. When in use, it must be a spring pad and a flat pad, the flat pad is next to the surface of the machine, and the spring pad is between the flat pad and the nut. As the name implies, a stop washer is a washer that is used in conjunction with a nut to prevent the nut from loosening. Generally divided into stop washers for round nuts, outer tongue stop washers, double lug stop washers, single lug stop washers and so on. Stop washers for round nuts are mainly used for locking small round nuts; outer tongue stop washers, double lug stop washers, and single lug stop washers are all used for locking with general nuts. Hardware, 15 years of ingenuity and focus on flat washer mold manufacturers, 20,000+ sets of mold customization production experience, monthly processing capacity of 100+ sets of molds, 3 million punching times per day, stamping accuracy up to 0.01mm, and 16 quality inspections. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!