Flat washer mold manufacturers, regular maintenance molds are responsible for the quality of customers

For flat washer mold manufacturers, when the flat washer is produced for a certain period, the mold will experience a certain degree of wear. At these times, the mold needs to be disassembled and repaired. Not only can it improve the later production efficiency, it is also a guarantee for quality. Xiaoshuo will understand with you about mold maintenance: 1. Re-sharpening of punches and lower molds. A mold with a sharp edge can produce a beautiful cut surface. If the edge is blunt, additional punching pressure is required. Moreover, the section of the workpiece is rough, which produces a great resistance, causing the punch to be bitten by the material. 2. The gap of the mold. If the gap of the mold is not properly selected relative to the plate thickness, the punch needs a large demolding force when it is separated from the material. If the punch is bitten by the material for this reason, please replace the lower die with a reasonable clearance. 3. The state of the processed material. When the material is dirty or dirty, the dirt adheres to the mold, making the punch bite by the material and unable to be processed. 4. Deformed materials. The warped material will clamp the punch after punching the hole, causing the punch to be bitten. For warped materials, please flatten them before processing. Hardware, 15 years of ingenuity and focus on flat washer mold manufacturers, 20,000+ sets of customized mold experience, monthly processing capacity of 100+ sets of molds, daily production capacity of 3 million punches, stamping accuracy up to 0.01mm, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!