Flat washers are used for pin shafts. What is the reason why the accuracy of flat washers does not meet the standard + stamping accuracy can reach 0.01mm

The technical staff responsible for the production of hardware for flat washers for pin shafts said that in the production of some higher-level flat washers, they will also encounter inaccurate dimensions, resulting in the phenomenon that the accuracy of the flat washers produced does not meet the standard. The following Xiaoshuo will work with you to understand what is causing it and how to solve it: Positioning pins, stop pins, etc. have changed or worn too much; the operator's negligence when feeding is left and right when feeding; the size of the strip Low accuracy, too narrow and too wide, difficult to feed materials, making it difficult to deliver to the designated location, the strip will shift back and forth in the guide plate, and the punched-out inner hole of the workpiece has a large deviation from the front and rear position of the shape. Flat washer manufacturers, when producing flat washers, should be processed in a continuous mold. It requires reasonable mold design, processing accuracy, and qualified assembly. At the same time, the precision of the production punch must be matched with the mold. Then there are cultural training, skill training and quality training for operators. Hardware, 15 years of exclusive cancellation of flat washers for shafts, 20,000+ sets of mold custom processing and production experience, product accuracy can reach 0.01MM, daily production capacity of 3 million strokes and 16 quality inspections strictly for quality control. It can quickly solve your time-critical problems, solve your product accuracy problems, and solve your flat gasket quality needs. Choose, choose to rest assured!