For precision stamping parts processing manufacturers, quality is the path to growth and development

Precision stamping parts processing manufacturers, with the rapid development of the electronics, communications, and automotive industries in recent years, the demand for stamping plants has become higher and higher, and the quality of stamping parts has become more and more precise and strict. The development path of precision stamping parts processing manufacturers is to continuously improve the quality of stamping parts. The following Xiaoshuo introduces some common quality problems in production, I hope it will help you: (1) When the radius of curvature is constant, the thicker the sheet, or the longer the bending width, the easier it is to produce cracks. Using SPCC type steel plate, such as R/t<0.5, cracks will occur. Therefore, R/t is designed to be 0.5 or more to avoid cracks. (2) Make the bending line at right angles to the fiber direction. However, the bending limit of the rolled material is different in the fiber direction and the vertical direction. When the bending process is close to the limit, the relationship between the bending line and the fiber direction when the sheet is blanked must be considered. (3) The burr side is placed on the inner side of the curve. Hardware, 15 years of ingenuity and focus on precision stamping parts processing manufacturer, 20,000+ sets of mold customization processing and production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punches, stamping accuracy up to ±0.01mm, 16 quality inspections Strictly check the quality at all levels. Can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems!