For stamping parts processing in Wenzhou, the prerequisite for providing you with qualified products is the precision of the mold

Stamping parts processing Wenzhou, before producing a stamping part, the first is the design, processing and assembly of the mold. The reasonable design of a mold, precise processing, and experience in assembly determine the quality of later production. Xiaoshuo takes you to understand the stamping die: 1. The upper and lower templates play the role of fixing the knife edge, inserting the block, inserting the child, ejecting pins, etc., external positioning, internal positioning, floating guide pins, dual-purpose pins, guide plates 、Floating blocks are also fixed on the lower template. The hardness of the lower template must be around HRC58-62. If the hardness is too low, it will affect the punching quality. 2. The thickness is generally 25-40mm. Some blades are cut directly on the template, that is, the blade is directly digged on the template. If the blade is chipped, chipped, worn, or has burrs, it is not easy to repair the mold; 3. Another method is to dig in. Block, that is, dig the knife edge on an entry block (the entry block is customarily called the 'lower die knife edge'), and then put the lower die knife edge into the lower template. The height should be as high as the lower template, and the error should be within plus or minus 1-2, plus or minus 0.005mm, which can be achieved by a general grinder or fitter. Hardware, 15 years of craftsmanship focused on stamping parts processing Wenzhou, 20000+ sets of mold customization production experience, monthly 100+ sets of mold processing capacity, 3 million punching times per day, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality control. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!