For stamping parts processing, it is a prerequisite to be qualified

For stamping parts processing, the pre-preparation is half of the qualified one. The qualification of stamping parts is not until the later production is qualified, but the moment when you receive your drawings, the experienced engineer has already seen the scene of the goods being delivered to your warehouse. First prepare the product development drawing, and determine the size of the template in the drawing, including each fixed plate, unloading plate, convex and concave molds, inserts, etc., pay attention to prepare the materials directly in the product development drawing, so that it is very useful for drawing mold drawings Good. I have seen that many mold designers directly perform manual calculations on product development drawings to prepare materials. This method is too inefficient. Directly draw template specifications and dimensions on the drawings and express them in the form of assembly drawings. On the one hand, material preparation can be completed. , On the other hand, a lot of work is saved in the work of various parts of the mold, because in the work of drawing each component, only positioning, pins, guide posts, and screw holes can be added to the preparation drawing. Hardware, 15 years of ingenuity focusing on stamping parts processing, 20,000+ sets of stamping die custom processing and production, skilled cooperation experience in more than 20 industries such as automobiles, communications, electronics, and home furnishing. The daily production capacity is 3 million strokes, and the quality is strictly controlled by 16 quality inspections. It can quickly solve time-critical problems, stamping accuracy problems, and mass production quality problems for you.