For stamping parts production plants, the ability to solve problems is the strength of stamping plants [hardware]

Stamping parts production plants often encounter various process problems in the production of stamping parts. The problem is not terrible. The strength of a stamping factory will be shown in the face of problems. The ability to solve problems is a kind of strength of the stamping factory. Xiaoshuo will understand with you: 1. The shape of metal stamping and drawing forming should be as simple and symmetric as possible, and it should be deep drawn at one time as much as possible; 2. For parts that need to be stretched multiple times, under the premise of ensuring the necessary appearance quality It is allowed that there are traces that can occur during the stretching process on the inside and outside; 3. Under the premise of ensuring the installation requirements, the side wall of the response should be stretched to a certain degree; 4. The bottom or flange of the stretched part The distance between the edge of the hole and the side wall should be appropriate; 5. The corner radius of the bottom and the wall, the flange and the wall of the stretched part, and the four corners of the rectangular part should be suitable; 6. The dimensions of the metal stamping stretched part should not be marked together. Dimensions. Hardware, 15 years of ingenuity and focus on stamping parts production plant, 20000+ sets of stamping die customized production experience, monthly 100+ sets of mold processing capacity, daily production capacity of 3 million punching times, stamping accuracy up to 0.01mm, 16 quality inspections strictly for quality check. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!