Frequently asked questions about metal stamping parts

The metal stamping parts are produced by stamping with little material loss. After the material is shaped, the internal structure of the metal is improved, and the strength of the stamping parts is increased; the metal stamping parts have higher dimensional accuracy, and Good interoperability, generally does not need additional machining to meet the assembly use; So many advantages of metal stamping parts, are there any disadvantages? Let's talk about the problems that it is prone to: The metal stamping parts cannot be completely cut when they are punched or trimmed. The broken section of the stamping parts is prone to burrs. Generally, we will control it within 0.1mm. When burrs occur, we must Use appropriate methods to control, you can do maintenance on the mold or consider the control on the part itself; metal stamping parts are prone to scratches, imprints, etc. during production. The general cause is the problem of the material itself or the surface of the mold. Impurities are easily generated by operators improperly; sometimes the material will break when producing metal stamping parts. We can consider whether the plasticity of the material is too poor, or the die is too tight, and the plasticity is better. When producing stamping parts, we will encounter various problems. As long as we trace the source, we can better prevent the problems. [Related recommendation] Learn more: How much do you know about new energy automobile stamping parts? Learn more: Experience sharing in the stamping processing industry Learn more: How to draw a drawing of precision metal stamping parts, please understand these steps