Fujian metal stamping parts processing plant, about stamping introduction + here are customized for you ()

The technicians of the Fujian metal stamping parts processing plant mentioned the introduction of stamping parts, so Xiaoshuo will tell you that 60 to 70% of the steel in the world is plate, most of which are made by stamping Finished product. Car bodies, chassis, fuel tanks, radiator fins, boiler drums, container shells, motors, electrical iron core silicon steel sheets, etc. are all stamped. There are also a large number of stamping parts in products such as instruments, household appliances, bicycles, office machinery, and living utensils. Compared with castings and forgings, stamping parts have the characteristics of thinness, uniformity, lightness and strength. Stamping can produce workpieces with stiffeners, ribs, undulations or flanges that are difficult to manufacture by other methods to improve their rigidity. Due to the use of precision molds, the accuracy of the workpiece can reach the micron level, and the repeatability is high, the specifications are consistent, and holes, bosses, etc. can be punched out. Hardware, 15 years of ingenuity focused on metal stamping parts processing, hundreds of processing and production equipment, 20,000+ sets of customized stamping die production experience, monthly processing of 100+ sets of molds, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm, 16 quality inspections are strictly controlled, focusing on quality and meticulous design. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose to rest assured!