Hangzhou hardware stamping parts manufacturer, die structure + more than 20 mold R u0026 D design engineers

Regarding the cognition of the die structure, the production staff of the Hangzhou hardware stamping parts manufacturer has something to say. Xiaoshuo has compiled some materials, and let everyone know about it together: Die structure: A die is a tool that separates or deforms the sheet. . A typical die consists of two parts, an upper die and a lower die. The die handle of the upper die is fixed on the slider of the punch and moves up and down with the slider, while the lower die is fixed on the worktable of the punch. The punch and the die are the working parts of the die that deform or separate the blank, and are fixed on the upper and lower templates with a pressure plate. The upper and lower templates are respectively equipped with guide sleeves and guide posts to guide the alignment of the punch and the die. The guide plate and the positioning pin are respectively used to control the feeding direction and length of the blank. The function of the discharge plate is to release the workpiece or blank from the punch after punching. Hardware, 15 years of ingenuity focused on metal stamping parts processing, 20000+ sets of stamping die custom production experience, monthly 100+ sets of mold processing capacity, hundreds of precision processing production equipment, daily production capacity of 3 million punches, and stamping accuracy up to 0.01mm , The raw materials are imported and the original national standard factory, and 16 quality inspections are strictly controlled. It can quickly solve time-critical problems for you, solve stamping accuracy problems, and solve production quality problems. Choose, choose rest assured!