Hardware 16 quality inspection process of electronic and electrical hardware stamping parts

Used in some electronic and electrical hardware stamping parts, it has strict requirements on metal materials, product size, product appearance, structural performance, dimensional accuracy, etc., to avoid low productivity and poor quality in production and assembly. Hardware, 16 quality inspection procedures, strict control at each level, to ensure that you are qualified in use and production and improve efficiency. Regarding the raw materials used in electronic and electrical hardware stamping parts, when the supplier sends each batch of raw materials to the warehouse, the raw materials of the hardware will have material testing, performance testing, size testing, appearance testing, hardness testing and salt spray testing. . To ensure that all indicators of raw materials are qualified before production, to ensure that each batch of materials is consistent with the material required by the customer. In production, after the mold is qualified, the hardware will undergo the first inspection to strictly confirm that the appearance of the product is qualified, the size is consistent, and the positions of each bending, stretching, and punching are consistent with the drawings. Then perform performance testing and physical assembly testing with the customer... until the shipping inspection report after the shipment is sealed and labeled with IQC confirmation. Hardware, because of its care and responsibility, has won the trust and recognition of many electronic and electrical hardware stamping customers!