Hardware and you analyze the production process of small hardware stamping parts

Hardware and you analysis of small metal stamping parts ① Plastic deformation of raw materials, including bending production, stretching production, forming production and compression production. ② Cut and separate the material, including punching and cutting. ⒊ Cut the material and separate the punching and shearing production: it means that the punching and shearing die is applied to the material with an external force above the cutting strength, and the closed or open contour separates one part of the material from the other part. This kind of production must be able to complete cutting and blanking. , Punching, punching, breaking, trimming and trimming work. (1) Cut: Cut the material and the blank according to the open contour to separate them. (2) Cutting: The material and the blank are punched and separated according to a closed contour. (3) Punching: Punching is just the opposite of blanking. It is a process of punching and cutting the material in the part with a closed contour to separate it, and the punched-out piece usually becomes waste. (4) Punch: Punch and cut open grooves at the end of the material. (5) Splitting: Punching and cutting a flat, curved or hollow blank into two parts or several parts. , Is your trusted partner. If you want to know more, welcome to consult: WeChat same number